Allied Telesis AT-9000 Series - Manual (Page 320)

Chapter 14: IPv4 and IPv6 Management Address Commands
292
SHOW IPV6 INTERFACE
Syntax
show ipv6 interface
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the IPv6 management address on the
switch. Figure 70 is an example of the information.
Figure 70. SHOW IPV6 INTERFACE Command
The fields are described in Table 29.
Example
The following example displays the IPv6 management address:
awplus# show ipv6 interface
Interface IPv6-Address
VLAN3-0 832a:5821:b34a:0:0:0:187:95a/64
Table 29. SHOW IPV6 INTERFACE Command
Parameter Description
Interface The VID of the VLAN to which the
management address is assigned.
IPv6 Address The IPv6 management address of the
switch.