Allied Telesis AT-9000 Series - Manual (Page 331)

303
Chapter 16
SNTP Client Commands
The SNTP commands are summarized in Table 31.
Table 31. Simple Network Time Protocol Commands
Command Mode Description
“CLOCK SUMMER-TIME” on
page 304 Global
Configuration Activates Daylight Savings Time on
the SNTP client.
“CLOCK TIMEZONE” on page 305 Global
Configuration Sets the UTC offset value, the time
difference in hours and minutes
between local time and Coordinated
Universal Time (UTC).
“NO CLOCK SUMMER-TIME” on
page 306 Global
Configuration Deactivates Daylight Savings Time
and enables Standard Time.
“NO NTP PEER” on page 307 Global
Configuration Disables the NTP client.
“NTP PEER” on page 308 Global
Configuration Specifies the IP address of the NTP or
SNTP server from which the switch is
to obtain the date and time.
“PURGE NTP” on page 309 Global
Configuration Restores the default settings to the
SNTP client.
“SHOW CLOCK” on page 310 User Exec and
Privilege Exec Displays the date and time.
“SHOW NTP ASSOCIATIONS” on
page 311 Privilege Exec Displays the settings of the NTP client
on the switch.
“SHOW NTP STATUS” on page 313 Privilege Exec Displays whether the switch has
synchronized its time with the
specified NTP or SNTP server.