Allied Telesis AT-9000 Series - Manual (Page 955)

AT-9000 Switch Command Line User’s Guide
927
SHOW DOT1X
Syntax
show dot1x
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display whether 802.1x port-based network access
control is enabled or disabled on the switch and the IP address of the
RADIUS server. Only the first IP address in the server table on the switch
is displayed. To view all the server IP addresses, refer to “SHOW
RADIUS” on page 1396. An example is shown in Figure 162.
Figure 162. SHOW DOT1X Command
Example
This example displays the status of the 802.1x port-based network access
control feature and the IP address of the RADIUS server:
awplus# show dot1x
802.1 Port-Based Authentication: Enabled
RADIUS server address (auth): 149.32.146.78