Allied Telesis AT-9000 Series User Manual
Page 646

Chapter 44: RSTP Commands
618
“SPANNING-TREE LINK-TYPE” on
page 631
Port Interface
Designates point-to-point ports and
shared ports.
“SPANNING-TREE LOOP-GUARD”
on page 632
Port Interface
Enables the BPDU loop-guard feature
on the ports.
“SPANNING-TREE MAX-AGE” on
page 633
Global
Configuration
Sets the maximum age parameter,
which defines how long bridge
protocol data units (BPDUs) are
stored by the switch before they are
deleted.
“SPANNING-TREE MODE RSTP” on
page 634
Global
Configuration
Designates RSTP as the active
spanning tree protocol on the switch.
“SPANNING-TREE PATH-COST” on
page 635
Port Interface
Specifies the costs of the ports to the
root bridge.
“SPANNING-TREE PORTFAST” on
page 636
Port Interface
Designates the ports as edge ports.
“SPANNING-TREE PORTFAST
BPDU-GUARD” on page 637
Port Interface
Enables the BPDU guard feature on a
port.
“SPANNING-TREE PRIORITY (Bridge
Priority)” on page 638
Global
Configuration
Assigns the switch a priority number.
“SPANNING-TREE PRIORITY (Port
Priority)” on page 639
Port Interface
Assigns priority values to the ports.
“SPANNING-TREE RSTP ENABLE”
on page 640
Global
Configuration
Enables RSTP on the switch.
Table 65. Rapid Spanning Tree Protocol Commands (Continued)
Command
Mode
Description