Allied Telesis AT-9000 Series - Manual (Page 398)

Chapter 20: Enhanced Stacking Commands
370
SHOW ESTACK
Syntax
show estack
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display whether enhanced stacking is enabled or
disabled on the switch and whether the switch’s mode is command or
member. Figure 80 is an example of the information the command
displays.
Figure 80. SHOW ESTACK Command
The fields are described in Table 37 on page 370.
Table 37. SHOW ESTACK Command
Parameter Description
Enhanced Stacking mode The status of enhanced stacking on the
switch and the mode of the switch. The
possible modes are:
 Command - Enhanced stacking is
enabled on the switch, and the switch
is set to the command mode.
Enhanced Stacking mode Member [1]
MAC address 00:15:77:cc:e2:42
Model Type AT-9000/52
Version Number AWPLUS 2.1.8.0