Allied Telesis AT-9000 Series - Manual (Page 934)

Chapter 61: 802.1x Port-based Network Access Control Commands
906
AUTH-MAC REAUTH-RELEARNING
Syntax
auth-mac reauth-relearning
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to force ports that are using MAC address
authentication into the unauthorized state. You might use this command to
reauthenticate the nodes on authenticator ports.
Example
This example forces authenticator port 23 into the unauthorized state to
reauthenticate the node:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.23
awplus(config-if)# auth-mac reauth-relearning