Allied Telesis AT-9000 Series - Manual (Page 839)

AT-9000 Switch Command Line User’s Guide
811
PRIVATE-VLAN
Syntax
private-vlan vid
Parameters
vid
Specifies a VLAN identifier. The range is 2 to 4094. The VID 1 is
reserved for the Default_VLAN. The VID must be unique from all
VIDs of VLANs that currently exist on the switch. You can specify
only one VID.
Mode
VLAN Configuration mode
Description
Use this command to create new private port VLANs. You can create just
one VLAN at a time. Refer to “SWITCHPORT MODE PRIVATE-VLAN
HOST” on page 813 to add host ports to a new VLAN, and to
“SWITCHPORT MODE PRIVATE-VLAN PROMISCUOUS” on page 814
to designate an uplink port.
Confirmation Command
“SHOW VLAN PRIVATE-VLAN” on page 812
Example
This example creates a private port VLAN with the VID 23:
awplus> enable
awplus# configure terminal
awplus(config)# vlan database
awplus(config-vlan)# private-vlan 23