Allied Telesis AT-9000 Series - Manual (Page 197)

AT-9000 Switch Command Line User’s Guide
169
CLEAR PORT COUNTER
Syntax
clear port counter port
Parameters
port
Specifies the port whose packet counters you want to clear. You
can specify more than one port at a time in the command.
Mode
User Exec mode and Privileged Exec mode
Description
Use this command to clear the packet counters of the ports. To display the
counters, refer to “SHOW PLATFORM TABLE PORT COUNTERS” on
page 201.
Example
This example clears the packet counters for ports 4 to 7:
awplus# clear port counter port1.0.4-port1.0.7