HP StorageWorks 2.32 SAN Switch - Manual (Page 90)

Fabric View
3–54 Web Tools Version 3.0.x/4.0.x User Guide
Table 3–20 gives descriptions of the fields on the AL_PA Device Config tab.
Table 3–20: AL_PA Device Config Tab Fields
Cfg Name Select an existing AL_PA Configuration name to
modify.
Create Cfg Click to create a new AL_PA configuration.
Delete Cfg Click to delete a AL_PA configuration.
Rename Cfg Click to rename a AL_PA configuration.
Zone/QLoop Selection List A list of Zone/QuickLoop members available to
add to the AL_PA configuration.
Add Mem Click to add a member from the Zone Selection
List into the Configuration Member List.
Remove Mem Click to remove a member from the Zone Selection
List into the Configuration Member List.
Search Mem Click to search for a switch name, WWN, alias,
zone, or Qloop in the Member Selection List based
on the type of objects displayed in that list.
AL_PA Config Members
name This field displays a list of the members that
belong to the AL_PA Configuration currently
selected in the Cfg Name field. The name of this
list depends on the name of the AL_PA
configuration selected. If an AL_PA configuration
is not selected, the name displays as “null
Members.”
Analyze Config Click to analyze the configuration that is selected
along with its member zones and aliases, and
comes up with a zoning error screen (see
Figure 3–14) in the event of a conflict.
Enable Config Select this option and press the Apply button to
enable the selected config for zoning the fabric.
Disable Zoning Select this option and press the Apply button to
disable the selected config for zoning the fabric.
Refresh Fabric Click to refresh the fabric view with the latest
Domain/Port and WWN changes.