HP StorageWorks 2.32 SAN Switch - Manual (Page 215)

Switch View
4–59 Web Tools Version 3.0.x/4.0.x User Guide 4–59
To choose the slot/port and ALPA that you want to graph:
1. Double-click on the folder in the Slot/Port Selection List window.
A drop-down list of slots/ports appears.
2. Select the Slot/Port that you want to monitor or change by using one of the
following methods:
• Type the Slot/Port number in the Enter/Drag slot,port window.
• Drag the Slot/Port “folder” from the Slot/Port Selection window to the
Enter/Drag slot,port window.
3. Select the ALPA number that you want to graph by using one of the following
methods:
• Type the ALPA number in the Enter/drag Alpa window.
• Drag the ALPA “file” from the Port Selection window to the Enter/drag
ALPA window.
4. Select OK.
An ALPA Error graph will be displayed.
An example of an ALPA Error graph, displaying CRC errors for a given port and a
given ALPA, is shown in Figure 4–48.
Figure 4–48: ALPA Error graph example