Installing a web browser, Configuring the web browser, Configuring netscape communicator – HP StorageWorks 2.32 SAN Switch User Manual
Page 33: Configuring internet explorer

Installing and Launching Web Tools
2–3
Web Tools Version 3.0.x/4.0.x User Guide
2–3
Installing a Web Browser
If not already installed, install one of the following browsers:
•
Netscape Communicator 4.6x or later. It is available at
http://www.netscape.com
•
Internet Explorer 4.01 or later (i.e., 5.5 Service Pack 2 or later is highly
recommended). It is available at:
http://www.microsoft.com
Configuring the Web Browser
Specific browser settings are required for the correct operation of Web Tools with
either Netscape Communicator or Internet Explorer.
Configuring Netscape Communicator
The web browser cache must be cleared after the installation of Fabric OS V4.0.x.
Some browsers use local cache copies of .jar files and/or image files to improve
performance (depending on the options selected in browser), which can cause
incorrect display in Web Tools.
To remove cached files from Netscape Communicator:
1. Select Edit > Preferences
2. Click Advanced in the Category box to expand it, then click Cache.
3. On the Cache panel, click Clear Memory Cache.
4. Click Clear Disk Cache.
5. Click OK.
6. Exit and relaunch the browser.
Configuring Internet Explorer
Correct operation of Web Tools with Internet Explorer requires clearing the browser
cache after installation, and specifying the appropriate settings for browser refresh
frequency and process model.