HP StorageWorks 2.32 SAN Switch - Manual (Page 111)

Fabric View
–75 Web Tools Version 3.0.x/4.0.x User Guide 3–75
A description of the fields on the Port Zone tab is shown in Table 3–28.
Table 3–28: Port Zone Tab Fields
Zone Name To display or modify an existing zone, select a zone name.
Create Zone Select to create a new zone. A dialog displays in which you
can enter the name of the new zone. All names must be
unique and contain no spaces.
Delete Zone Select to delete the zone selected in the Zone Name field.
Deleting a zone automatically removes it from all zone
configurations.
Rename Zone Select to edit the name of the zone selected in the Zone
Name field. A dialog displays in which you can edit the name
of the zone.
Member
Selection List A list of potential zone members, including switches, ports,
and aliases.
[Zone Name]
Members This field lists members of the zone selected in the Zone
Name field. The name of this list depends on the name of the
selected zone. If no zone is available, the name displays as
“null Members.”
< Search Mem Select to search the list of potential zone members.
Add Sw, Port > Select to add a switch/port that is not a part of the member
list, or current fabric.
Add Mem > Select to add the member selected in the Member Selection
List to the Zone Members list. If an entire switch is selected,
all ports on the switch are added to the zone. You can also
select individual ports. To add an alias to the zone, select it
from the Aliases sub-tree (the alias must already exist).
< Remove Mem Select to remove the selected member from the [Zone name]
Members list.
Ref Zone Click to refresh the local zoning database copied from the
switch. This button automatically flashes red/gray if the fabric
zoning data is changed by another client.
A/D WWN Click to add or delete a WWN to or from all the aliases, zones,
and FA zones defined.
Rpl WWN Click to replace a WWN with another one in all aliases, zones,
and FA zones defined.
OK Applies the changes to the switch and exits the frame.