HP StorageWorks 2.32 SAN Switch - Manual (Page 106)

Fabric View
3–70 Web Tools Version 3.0.x/4.0.x User Guide
Switch/Port Level Zoning
Upon selecting the Switch/Port Level Zoning button from the Zoning Selection menu
and selecting OK, the Switch/Port Level Zoning menu with the Port Alias tab
displays, as shown in Figure 3–30.
Following is a list of the tabs provided in the Switch/Port Level Zoning menu:
• Port Alias
• Port Zone
• QuickLoop
• Port Fabric Assist
• Port Config
Table 3–26: 4.0.x Zoning Schemes
Switch/Port Level Zoning Use when alias, zoning, and
configuration file operations are on
ports. Aliases, zones, and configuration
files which have objects other than ports
can also be selected or operated on.
WWN Level Zoning Use when alias, zoning, and
configuration file operations are on
WWNs. Aliases, zones, and
configuration files which have objects
other than WWNs can also be selected
or operated on.
AL_PA Level Zoning Use when alias, zoning, and
configuration file operations are on an
AL_PA. Aliases, zones, and
configuration files which have objects
other than AL_PAs can also be selected
or operated on.
Mixed Level Zoning Use this mode when you want any
object to be selected as a member of a
zone, alias, or configuration file. This
mode does not allow specification of a
LUN.