HP StorageWorks 2.32 SAN Switch User Manual
Page 149
–113
Web Tools Version 3.0.x/4.0.x User Guide
3–113
Delete Qloop
Click to delete a QuickLoop member.
Rename Qloop
Click to rename a QuickLoop member.
Switch Selection List
This field displays a list of potential QuickLoop members,
including switches, ports, WWNs, and QuickLoop
AL_PAs, and Fabric Assists.
[QuickLoop]
Members
This field displays a list of the zone members selected in
the QuickLoop Name pull-down menu. The name on this
list depends on the name of the selected QuickLoop
member. If a name is not selected, the name displays as
“null Members.”
< Search Mem
Click to search for a switch name, WWN, alias, zone,
QuickLoop, or FA Zone in the Member Selection List
based on the type of objects displayed in that list.
Add Mem >
Click to add a member from the member selection list
into the QuickLoop member contents.
< Remove Mem
Click to remove a member from the QuickLoop member
list when selected.
Ref Zone
Click to refresh the local zoning database copied from
the switch. This button automatically flashes red/gray if
the fabric zoning data is changed by another client.
A/D WWN
Click to add or delete a WWN to or from all the aliases,
zones, and FA zones defined.
Rpl WWN
Click to replace a WWN with another one in all aliases,
zones, and FA zones defined.
OK
Click to apply the changes to the switch and exit the
window.
Apply
Click to apply the changes to the switch.
Close
Click to exit the window without making any changes to
the switch.
Clr All
Select to clear the zoning database, disable the effective
configuration (if there is one), and then commit to the
switch.
Table 3–42: QuickLoop Tab Fields (Continued)