HP StorageWorks 2.32 SAN Switch - Manual (Page 103)

Fabric View
3–67 Web Tools Version 3.0.x/4.0.x User Guide 3–67
For a description of the fields on the Config tab, see Table 3–25.
Table 3–25: Config Tab Fields
Cfg Name Select the existing Cfg name to be modified.
Create Cfg Click to create a new configuration.
Delete Cfg Click to delete a configuration.
Rename Cfg Click to rename a configuration.
Zone/QLoop Selection List A list of Zone/QuickLoop members available to
add to the configuration.
Add Mem Click to add a member from the Zone Selection list
into the Config Member list.
Remove Mem Click to remove a member from the Config
Members list into the Zone Selection list.
Search Mem Click to search for a switch name, WWN, alias,
zone, or QuickLoop in the Member Selection List
based on the type of objects displayed in that list.
Config Members A list of the members that belong to the
Configuration currently selected in the Cfg Name
field. The name of this list depends on the name of
the configuration selected. If a configuration is not
selected, the name displays as “null Members.”
Analyze Config Click to analyze the configuration that is selected
along with its member zones and aliases, and
comes up with a zoning error screen (see
Figure 3–34 on page 3–82) in the event of a
conflict.
Refresh Fabric Click to refresh the fabric view with the latest
Domain/Port and WWN changes.
Enable Config If this option is checked, and the Apply button
pressed, the selected config would be used for
zoning the fabric.
Disable Zoning Select this option and press the Apply button to
disable the selected zoning configuration.
Ref Zone Click to reload the local zoning database copied
from the switch. This button automatically flashes
red/gray if the fabric zoning data is changed by
another client.