HP StorageWorks 2.32 SAN Switch - Manual (Page 282)

Switch View
4–126 Web Tools Version 3.0.x/4.0.x User Guide
Table 4–41 provides a description of the fields on the Extended Fabric tab.
Table 4–41: Extended Fabric Tab Fields
Port Number Port Number being used for the Extended Fabric.
Current Value Displays the current value for the Long Distance Setting on
a port.
L0 No long distance setting enabled
L1 (Optionally licensed software.) Medium long
distance setting enabled - less than 50 km or 31 miles.
L2 (Optionally licensed software.) Long distance
setting enabled - less than 100 km or 62 miles.
LE Extended Normal setting enabled - less than 10 km
or 6 miles.
Long Distance
Setting Click to view or set Long Distance settings. Change long
distance settings by selecting from the choices in the
drop-down menu.
Slot Number tabs Click to view a specific slot.
Slot tabs will only appear when viewing an StorageWorks
Core switch series switch.
OK Click to save the changes made to the tab and to exit the
tab.
Apply Click to save the changes made to this tab and to stay in the
current tab. Additional changes can be made and the Apply
button pressed when making changes incrementally.
Close Click to exit the current tab. If changes have been made but
not committed by clicking the Apply button, a dialog box
displays.
Reset Click to reset the tab to the last set of committed changes. If
the Apply button has not been pressed on this tab, the
parameters are returned to the original values the tab had
when it was initially displayed.
Refresh Click to view the most current information available from the
switch.