HP StorageWorks 2.32 SAN Switch - Manual (Page 141)

Fabric View
–105 Web Tools Version 3.0.x/4.0.x User Guide 3–105
Table 3–39 provides a description of the fields on the AL_PA Device Config tab.
Table 3–39: AL_PA Device Config Tab Fields
Cfg Name Select an existing AL_PA Configuration name to
modify.
Create Cfg Click to create a new AL_PA configuration.
Delete Cfg Click to delete a AL_PA configuration.
Rename Cfg Click to rename a AL_PA configuration.
Zone/QLoop/FA Zone
Selection List A list of Zone/QuickLoop members available to add
to the AL_PA configuration.
[AL_PA] Config Members
name This field displays a list of the members that belong
to the AL_PA Configuration currently selected in the
Cfg Name field. The name of this list depends on
the name of the AL_PA configuration selected. If a
AL_PA configuration is not selected, the name
displays as “null Members.”
< Search Mem Click to search for a switch name, WWN, alias,
zone, QLoop, or FA Zone in the Member Selection
List based on the type of objects displayed in that
list.
Add Mem > Click to add a member from the Zone Selection List
into the Configuration Member List.
< Remove Mem Click to remove a member from the Zone Selection
List into the Configuration Member List.
Analyze Config Click to analyze the configuration that is selected
along with its member zones and aliases, and
comes up with a zoning error screen (see Figure
3-13) in the event of a conflict.
Refresh Fabric Click to refresh the fabric view with the latest
Domain/Port and WWN changes.
Enable Config Select this option and press the Apply button to
enable the selected config for zoning the fabric.
Disable Zoning Select this option and press the Apply button to
disable the selected config for zoning the fabric.
Save Config Select this option to save the configuration without
enabling or disabling.