HP StorageWorks 2.32 SAN Switch - Manual (Page 142)

Fabric View
3–106 Web Tools Version 3.0.x/4.0.x User Guide
Mixed Level Zoning
Mixed Level Zoning is provided for backward compatibility with zones created by
releases prior to 4.0.x. After selecting the Mixed Level Zoning button from the Zoning
Selection window and clicking OK, the Mixed Level Zoning window with the Alias
tab is displayed as shown in Figure 3–44.
Following is a list of the tabs provided in the Mixed Level Zoning menu:
• Alias
• Zone
• QuickLoop
• Fabric Assist
• Config
Ref Zone Click to refresh the local zoning database copied
from the switch. This button automatically flashes
red/gray if the fabric zoning data is changed by
another client.
A/D WWN Click to add or delete a WWN to or from all the
aliases, zones, and FA zones defined.
Rpl WWN Click to replace a WWN with another one in all
aliases, zones, and FA zones defined.
OK Applies the changes to the switch and exits the
switch.
Apply Click to apply all changes made including changes
made on other tabs in the view. Changes cannot be
cancelled once they are applied.
Close Click to exit the window without making any
changes to the switch.
Clr All Select to clear the zoning database, disable the
effective configuration (if there is one), and then
commit to the switch.
Table 3–39: AL_PA Device Config Tab Fields (Continued)