HP StorageWorks 2.32 SAN Switch - Manual (Page 233)

Switch View
–77 Web Tools Version 3.0.x/4.0.x User Guide 4–77
QuickLoop Tab (Optional Software)
Use the QuickLoop tab to manage QuickLoop configurations. For information about
managing the features available when QuickLoop and Zoning are used together, see
“Zone Administration View V3.0.x (Optional Software)” on page 3–13. For detailed
information about the QuickLoop feature, refer to the HP StorageWorks QuickLoop
Fabric Assist Version 3.0.x/4.0.x User Guide.
The QuickLoop tab is displayed only when the QuickLoop license is installed.
NOTE: The QuickLoop feature is not supported by Fabric OS V4.0.x.
Apply Click to save the changes made to this tab and to stay in
the current tab. Additional changes can be made and the
APPLY button pressed when making changes
incrementally.
Close Click to exit the current tab. If changes have been made
but not committed by clicking the APPLY button, a dialog
box displays.
Reset Click to reset the tab to the last set of committed changes.
If the APPLY button has not been pressed on this tab, the
parameters are returned to the original values the tab had
when it was initially displayed.
Table 4–21: Remote Switch Tab Fields (Continued)