Snmp tab, Figure 4-67: snmp tab, Snmp tab –104 – HP StorageWorks 2.32 SAN Switch User Manual

Page 260

Text mode
Original mode

4–104

Web Tools Version 3.0.x/4.0.x User Guide

SNMP Tab

Use the SNMP tab for administration of the SNMP subsystem. From the SNMP tab
you can specify the switch community string, location, trap level, and trap recipients.
The SNMP tab is shown in Figure 4–67.

NOTE: In order for the switches to send SNMP traps, you must first enter the Telnet command

snmpMibCapSet

. This enables the MIBs on all switches to be monitored.

Figure 4–67: SNMP tab