Sfp tab, Sfp tab –7, The sfp tab in the port information view –7 – HP StorageWorks 2.32 SAN Switch User Manual

Page 295

Text mode
Original mode

Port View

5–7

Web Tools Version 3.0.x/4.0.x User Guide

5–7

SFP Tab

The SFP tab provides information about the Small form factor pluggable (SFP)
installed in the selected port. The information displayed depends on the type of SFP
installed. The SFP tab is shown in Figure 5–3. The following SFPs are supported:

•

Standard: Module type (short wave, long wave, copper, etc.).

•

Serial ID: Module type, plus extended information about capabilities, interfaces,
and manufacturer.

•

Smart Finisar: All of the above information, plus SFP active status.

If the port does not contain a SFP, the following information displays: “Not a serial ID
SFP. No SFP info available.”

Figure 5–3: The SFP tab in the Port Information view