Al_pa level zoning, Al_pa level zoning –45 – HP StorageWorks 2.32 SAN Switch User Manual
Page 81

Fabric View
3–45
Web Tools Version 3.0.x/4.0.x User Guide
3–45
AL_PA Level Zoning
AL_PA Level Zoning is a replacement for QuickLoop Zoning. With AL_PA Level
Zoning, only members of a QuickLoop can be a member of the zone. Zone members
are specified through their AL_PA. Upon selecting the AL_PA Level Zoning button
from the Zoning Selection window and clicking OK, the AL_PA Level Zoning menu
with the AL_PA Device Alias tab displays.
Figure 3–20 shows a typical AL_PA Device Alias tab of the AL_PA Zoning window.
Following is a list of the tabs provided in the AL_PA Level Zoning menu:
•
Device Alias
•
Device Zone
•
QuickLoop
•
Device Config
Ref Zone
Click to refresh the local zoning database copied
from the switch. This button automatically flashes
red/gray if the fabric zoning data is changed by
another client.
A/D WWN
Click to add/delete a WWN to/from all the aliases
and zones defined.
Rpl WWN
Click to replace a WWN with another one in all
aliases and zones defined.
OK
Applies the changes to the switch and exits the
switch.
Apply
Click to apply all changes made including
changes made on other tabs in the view.
Changes cannot be cancelled once they are
applied.
Close
Click to exit the window without making any
changes to the switch.
Clr All
Select to clear the zoning database, disable the
effective configuration (if there is one), and then
commit to the switch.
Table 3–16: WWN Config Tab Fields (Continued)