HP StorageWorks 2.32 SAN Switch - Manual (Page 212)

Switch View
4–56 Web Tools Version 3.0.x/4.0.x User Guide
• SCSI Read per port
• SCSI Write per port
Each graph will prompt you with a data entry window to select the port and LUN to be
monitored, as shown in Figure 4–44.
Figure 4–44: SCSI graph data entry window
To choose the port and LUN to monitor:
1. Double-click on the folder in the Port Selection List window.
A drop-down list of ports appears.
2. Select the Slot/Port that you want to monitor or change by using one of the
following methods:
• Type the port number in the Enter/Drag Slot/Port Numbers window.
• Drag the Slot/Port “file” from the Port Selection window to the Enter/Drag
Slot/Port Number window.
3. Enter a LUN number in the Enter LUN Number (Hex) window.
NOTE: You can only enter four LUN numbers at a time. If you try to enter more than four
LUN masks, a warning window will appear.
4. Select OK.