HP StorageWorks 2.32 SAN Switch - Manual (Page 80)

Fabric View
3–44 Web Tools Version 3.0.x/4.0.x User Guide
Table 3–16 gives descriptions of the fields on the WWN Config tab.
Table 3–16: WWN Config Tab Fields
Cfg Name Select to modify an existing WWN configuration
name to be modified.
Create Cfg Click to create a new WWN configuration.
Delete Cfg Click to delete a WWN configuration.
Rename Cfg Click to rename a WWN configuration.
Zone/QLoop Selection List This field displays a list of Zone and QuickLoop
members available to add to the WWN
configuration.
Add Mem Click to add a member from the config members
list into the zone selection list.
Remove Mem Click to remove a member from the zone
selection list into the Config Member list.
Search Mem Click to search for a switch name, WWN, alias,
zone, or Qloop in the Zone Selection List based
on the type of objects displayed in that list.
Config Members This field displays a list of the members that
belong to the WWN Configuration currently
selected in the Cfg Name field. The name of this
list depends on the name of the WWN
configuration selected. If WWN configuration is
not selected, the name displays as “null
Members.”
Analyze Config Click to analyze the configuration that is selected
along with its member zones and aliases. A
zoning error screen (see Figure 3–14) appears in
the event of a conflict.
Enable Config If this option is checked, and the Apply button
pressed, the selected configuration would be
used for zoning the fabric.
Disable Config Click the Disable Config radio button to disable
the selected WWN Zone configuration.
Refresh Fabric Click to refresh the fabric view with the latest
Domain/Port and WWN changes.