HP StorageWorks 2.32 SAN Switch - Manual (Page 42)

Fabric View
3–6 Web Tools Version 3.0.x/4.0.x User Guide
Status legend Defines meaning of colors visible in the background of
the switch icons. Each color indicates a different
operational state:
Green - Healthy
Yellow - Marginal (mix of good and faulty readings)
Red - Down (more than two faulty readings)
Gray - Unknown or unmonitored
If no data is available from a switch, the color displays
as gray.
NOTE: For all statuses that are based on errors per time
interval, any errors will not cause the status to show faulty
until the entire sample interval has passed.
The Switch Panel (on the right side of Figure 3–1)
Switch Select to open Switch View for the switch. Each switch
type is represented by a different icon. The background
color around the icon indicates the status of the switch
For information about this view, see “Switch View” on
page 4–1.
Events Select to open Switch Events View to display the switch
events log
For information about this view, see “Switch Events
View” on page 4–6.
Admin Select to open Switch Administration View.
Telnet Select to launch the Telnet Interface for the switch
For information about this view, see “Telnet Interface”
on page 4–130.
Table 3–1: Button and Icons in the Control Panel (Continued)