HP StorageWorks 2.32 SAN Switch - Manual (Page 221)

Switch View
4–65 Web Tools Version 3.0.x/4.0.x User Guide 4–65
Table 4–16 provides a description of the fields on the Switch Settings tab:
Table 4–16: Switch Settings Tab Fields
Name Enter data for the switch name. Enter a new name to change a
name in this field.
Domain ID Displays or sets switch domain ID. Domain IDs must be
unique within a fabric.
To change domain ID, enter new domain ID in this field. Use a
number from 1 to 239 for normal operating mode (FCSW
compatible) and a number from 0 to 31 for VC encoded
address format mode (backward compatible to StorageWorks
switches operating at firmware version 2.x or above).
Serial Number Displays the serial number of the switch.
Extended Fabric
Mode Click on the box to allow ports to be configured for long
distance, or uncheck to turn the option off.
(Status) Enabled Click on the radio button to enable the switch.
(Status)
Disabled Click on the radio button to disable the switch.
OK Click and exit Administrative View to save any changes.
Apply Click to save any changes made to this tab and remain in the
current tab. Additional changes can be made and the Apply
button clicked when making changes incrementally.
Close Click to exit the Switch Admin view. If changes have been
made and not committed by clicking the Apply button, a dialog
box is presented. It allows the changes to be committed or
deleted.
Reset Click to reset the tab to the last set of committed changes. If
the Apply button has not been pressed on this tab, the
parameters are returned to the original values the tab had
when it was initially displayed.