Remote switch tab (optional software), Figure 4-73: remote switch tab, Remote switch tab (optional software) –123 – HP StorageWorks 2.32 SAN Switch User Manual

Page 279: Remote switch tab –123

Text mode
Original mode

–123

Web Tools Version 3.0.x/4.0.x User Guide

4–123

Remote Switch Tab (Optional Software)

Use the Remote Switch feature to configure a pair of switches to operate over an
extended WAN interface so that they can communicate across an ATM network by
using a compatible Fibre Channel to ATM gateway. This feature requires an active
Remote Switch license in both switches.

For detailed information on the Remote Switch feature, refer to the HP StorageWorks
Extended Fabric Version 3.0.x/4.0.x User Guide.

Use the Remote Switch tab to manage the Remote Switch option. This tab displays
only when the Remote Switch is installed. The Remote Switch tab is shown in
Figure 4–73.

Figure 4–73: Remote Switch tab