HP StorageWorks 2.32 SAN Switch - Manual (Page 75)

Fabric View
3–39 Web Tools Version 3.0.x/4.0.x User Guide 3–39
Table 3–14 provides a description of the fields on the QuickLoop tab.
Table 3–14: QuickLoop Tab Fields
QuickLoop Name Select an existing QuickLoop member to modify.
Create Qloop Click to create a new QuickLoop member.
Delete Qloop Click to delete a QuickLoop member.
Rename Qloop Click to rename a QuickLoop member.
Switch Selection List This field displays a list of potential QuickLoop members,
including switches, ports, WWNs, and QuickLoop
AL_PAs, and Fabric Assists.
QuickLoop Members This field contains a list of the zone members selected in
the QuickLoop Name field. The name on this list
depends on the name of the selected QuickLoop
member. If a name is not selected, the name displays as
“null Members.”
Search Mem Click to search for a switch name, WWN, Alias, Zone or
QuickLoop in the Member Selection List based on the
type of objects displayed in that list.
Add Mem Click to add a member from the member selection list
into the QuickLoop member contents.
Remove Mem Click to remove a member from the QuickLoop member
list when selected.
Ref Zone Click to refresh the local zoning database copied from
the switch. This button automatically flashes red/gray if
the fabric zoning data is changed by another client.
A/D WWN Click to add or delete a WWN to or from all the aliases
and zones defined.
Rpl WWN Click to replace a WWN with another one in all aliases
and zones defined.
OK Click to apply the changes to the switch and exit the
switch.
Apply Click to apply the changes to the switch.
Close Click to exit the window without making any changes to
the switch.