HP StorageWorks 2.32 SAN Switch - Manual (Page 244)

Switch View
4–88 Web Tools Version 3.0.x/4.0.x User Guide
Table 4–26 provides a description of the fields on the Port Settings tab.
Table 4–26: Port Settings Tab Fields
Port Number Port Number.
Trunking Enabled Check to enable or uncheck to disable trunking. Four trunk
ports form a group, with one of them in the role of master
port, and the group can have member ports.
Port Enabled Check to enable or uncheck to disable ports on the switch.
Current Port
Speed Click to display the current port speed. Port speed can be
fixed to 1Gbps, 2Gbps, or negotiate 1Gbps (N1G) or
negotiate 2Gbps (N2G). If the speed is set to negotiate, the
speed will depend on the negotiated result.
Change Port
Speed Click the drop-down menu to change the port speed. Port
speed can be changed to 1Gbps, 2Gbps, or negotiate. If the
speed is set to negotiate, the speed will depend on the
negotiated result.
OK Click to save the changes made to the tab and to exit the
tab.
Apply Click to save the changes made to this tab and to stay in the
current tab. Additional changes can be made and the Apply
button pressed when making changes incrementally.
Close Click to exit the current tab. If changes have been made but
not committed by clicking the Apply button, a dialog box
displays.
Reset Click to reset the tab to the last set of committed changes. If
the Apply button has not been pressed on this tab, the
parameters are returned to the original values the tab had
when it was initially displayed.