HP StorageWorks 2.32 SAN Switch - Manual (Page 116)

Fabric View
3–80 Web Tools Version 3.0.x/4.0.x User Guide
Table 3–30 provides a description of the fields and buttons that appear on the Port
Config tab.
Table 3–30: Port Config Tab Fields
Cfg Name Select an existing configuration to display or modify.
Create Cfg Click to create a new configuration. A dialog displays. Enter
the name of the new configuration. All names must be
unique and contain no spaces.
Delete Cfg Click to delete the configuration selected in the Cfg Name
field.
Rename Cfg Click to edit the name of the configuration selected in the Cfg
Name field.
Zone/QLoop
Selection List This field provides a list of the zones, QuickLoops, and FA
Zones available to add to the configuration.
[Config] Members The members of the configuration selected in the Cfg Name
field. The name of this list depends on the selection. Only
one configuration can be enabled at a time; if none are
enabled, zoning is not active in the fabric.
< Search Mem Click to search for a Zone, QuickLoop, or FA Zone in the
Member Selection List based on the type of objects
displayed in that list.
Add Mem > Click to add the switch selected in the Zone/QLoop Selection
List to the Config Members list.
< Remove Mem Click to remove the selected member from the Config
Members list.
Analyze Config Analyzes the configuration that is selected along with its
member zones and aliases. A zoning configuration error
screen (see Figure 3–34) appears in the event of a conflict.
Refresh Fabric Click to refresh the fabric view with the latest Domain/Port
and WWN changes.
Enable Config Check to enable the configuration selected in the Cfg Name
pull-down menu, or uncheck to disable it.
Disable Zoning Check to disable zoning.
Save Config Check to save config without enabling or disabling.
Ref Zone Click to refresh the local zoning database copied from the
switch. This button automatically flashes red/gray if the fabric
zoning data is changed by another client.