HP StorageWorks 2.32 SAN Switch - Manual (Page 170)

Switch View
4–14 Web Tools Version 3.0.x/4.0.x User Guide
Thresholds for the Remaining Classes
The Port, E_Port, F/FL Copper Port, and F/FL Optical Port classes display the
following fields for each area (Link Loss, Sync Loss, Signal Loss, Protocol Error,
Invalid Words, Invalid CRCs, State Changes, RX Performance, TX Performance):
Area Select
checkbox Select a Fabric Watch area to configure. Only one area can
be selected at a time.
Thresh element
drop-down list Check or uncheck to specify if you want this element to be
monitored.
The column for the Current area contains the following item:
“Send alarms
when” box Use this text box to specify whether you want to be notified
when the area is in the acceptable range (OK) or is faulty
(FAULTY).
Table 4–4: SFP Classes Thresholds (Continued)
Table 4–5: Remaining Classes Thresholds
Low text box Enter the low threshold boundary.
High text box Enter the high threshold boundary.
Threshold Type
drop-down list Select the type of threshold.
Time period
drop-down list Select the time period for which you want a time-based count
to be measured.