Element configuration tab, Table 4-8: element thresholds tab fields, Element configuration tab –24 – HP StorageWorks 2.32 SAN Switch User Manual

Page 180: Element thresholds tab fields –24

Switch View

4–24

Web Tools Version 3.0.x/4.0.x User Guide

Element Configuration Tab

The Element Configuration tab of the Fabric Watch > Threshold Config window is
shown in Figure 4–14.

Figure 4–14: Element Configuration tab of the Threshold Configuration window

Table 4–8 describes the fields available in the Element Thresholds tab.

Table 4–8: Element Thresholds Tab Fields

Select Element

Select the element of interest from the drop-down menu.

Status

Enable/Disable

Select appropriate radio button to Enable or Disable the
status of the selected element.

Behavior Type

Trigger/Continuous

Select the appropriate radio button to select a behavior
mode.

In Triggered Behavior mode, Fabric Watch only registers
an event when a variable exceeds a threshold. An event
will not be triggered again until the variable falls and
exceeds the threshold again.

In Continuous mode, Fabric Watch registers an event
when a variable exceeds a threshold and continues to
register an event for every time interval.