HP StorageWorks 2.32 SAN Switch - Manual (Page 223)

Switch View
4–67 Web Tools Version 3.0.x/4.0.x User Guide 4–67
Table 4–17 provides a description of the fields on the User Admin tab.
NOTE: A user can only log into the User Admin tab if they have admin privileges. A user does
not gain access to the User Interface with the User ID and Password created in this tab.
Table 4–17: User Admin Tab Fields
User Name Enter new user name or modify the existing user name.
NOTE: You cannot change a new user name to one that is already being
used. Doing so will cause the following dialog box to appear:
New
Password Enter new password or modify the existing password.
Verify
Password Re-enter password to verify.
OK Click to save the changes made to the tab and exit the Switch
Administrative view.
Apply Click to save the changes made to this tab. Additional changes
can be made and the Apply button clicked when making changes
incrementally.
Close Click to exit the Switch Administration view. If changes have been
made but not committed by clicking the Apply button, a dialog box
displays to ask the user if they want to save the changes before
exiting the view.
Reset Click to reset the tab to the last set of committed changes. If the
Apply button has not been pressed on this tab, the parameters are
returned to the original values the tab had when it was initially
displayed.