beautypg.com

Snmp-server enable traps mac-notification – Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide User Manual

Page 451

background image

snmp-server enable traps mac-notification

Enables the MAC-notification trap whenever a MAC address event is generated on a device or an
interface.

The no form of this command disables the SNMP trap for MAC-notification events.

Syntax

snmp-server enable traps mac-notification

no snmp-server enable traps mac-notification

Command Default

MAC-notification traps are disabled on the device.

Modes

Global configuration

Interface configuration

Examples

The following example enables SNMP traps on the device for MAC-notification globally:

device(config)# snmp-server enable traps mac-notification

The following example disables SNMP traps on the device for MAC-notification globally:

device(config)# no snmp-server enable traps mac-notification

History

Release version

Command history

08.0.10

This command was introduced.

snmp-server enable traps mac-notification

FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide

451

53-1003086-04