beautypg.com

Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide User Manual

Page 341

background image

----------------------------------------------------------------------------

Bridge Max RegionalRoot IntPath Designated Root Root

Identifier Hop Bridge Cost Bridge Port Hop

hex cnt hex hex cnt

8001000cdb80af01 20 8001000cdb80af01 0 8001000cdb80af01 Root 20

Port Pri PortPath Role State Designa- Designated

Num Cost ted cost bridge

3/1 128 2000 MASTER FORWARDING 0 8001000cdb80af01

Syntax: show mstp instance-number

The instance-number variable specifies the MSTP instance that you want to display information for.

Output from Show MSTP

TABLE 52

Field

Description

MSTP Instance

The ID of the MSTP instance whose statistics are being displayed. For the CIST, this
number is 0.

VLANs

The number of VLANs that are included in this instance of MSTP. For the CIST this number
will always be 1.

Bridge Identifier

The MAC address of the bridge.

Bridge MaxAge sec

Displays configured Max Age.

Bridge Hello sec

Displays configured Hello variable.

Bridge FwdDly sec

Displays configured FwdDly variable.

Bridge Hop cnt

Displays configured Max Hop count variable.

Root MaxAge sec

Max Age configured on the root bridge.

Root Hello sec

Hello interval configured on the root bridge.

Root FwdDly sec

FwdDly interval configured on the root bridge.

Root Hop Cnt

Maximum hop count left from the root bridge.

Root Bridge

Bridge identifier of the root bridge.

ExtPath Cost

The configured path cost on a link connected to this port to an external MSTP region.

Regional Root Bridge The Regional Root Bridge is the MAC address of the Root Bridge for the local region.

IntPath Cost

The configured path cost on a link connected to this port within the internal MSTP region.

Designated Bridge

The MAC address of the bridge that sent the best BPDU that was received on this port.

Root Port

Port indicating shortest path to root. Set to "Root" if this bridge is the root bridge.

Port Num

The port number of the interface.

Pri

The configured priority of the port. The default is 128.

Spanning Tree Protocol

FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide

341

53-1003086-04