beautypg.com

L2-tunnel mode vxlan eline – Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide User Manual

Page 444

background image

l2-tunnel mode vxlan eline

Configures the Layer 2 tunnel encapsulation method as VXLAN UDP encapsulation.

Syntax

l2-tunnel mode vxlan eline

no l2-tunnel mode vxlan eline

Command Default

There is no Layer 2 tunnel encapsulation method by default.

Modes

Layer 2 tunnel interface configuration mode

Usage Guidelines

Use this command to configure the Layer 2 tunnel encapsulation method as VXLAN UDP
encapsulation. The no form of the command removes the configuration.

Examples

The following example shows the configuration of the Layer 2 tunnel encapsulation method as VXLAN
UDP encapsulation.

device(config)# interface l2-tunnel 1

device(config-l2-tnif-1)# l2-tunnel mode vxlan eline

History

Release version

Command history

08.0.10d

This command was introduced.

l2-tunnel mode vxlan eline

444

FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide

53-1003086-04