beautypg.com

Errdisable packet-inerror-detect – Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide User Manual

Page 439

background image

errdisable packet-inerror-detect

Enables the device to monitor configured ports for inError packets and defines the sampling time
interval in which the number of inError packets is counted. The no form of this command disables this
monitoring.

Syntax

errdisable packet-inerror-detect sampling-interval

no errdisable packet-inerror-detect sampling-interval

Command Default

There is no monitoring for inError packets on any port of the device.

Parameters

sampling-interval

Specifies the sampling interval in seconds. It can take a value in the inclusive range of 2 to
60 seconds.

Modes

Global configuration mode

Usage Guidelines

If the number of inError packets exceeds the configured threshold for two consecutive sampling
windows, then the configured port is error-disabled.

Examples

The following example shows the sampling interval set to three seconds.

Brocade(config)# errdisable packet-inerror-detect interval 3

History

Release version

Command history

07.3.00g

This command was introduced.

errdisable packet-inerror-detect

FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide

439

53-1003086-04