beautypg.com

Mac-notification interval – Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide User Manual

Page 445

background image

mac-notification interval

Specifies the MAC-notification interval in seconds between each set of generated traps. The no form of
this command sets the interval to its default value.

Syntax

mac-notification interval secs

no mac-notification interval

Command Default

There is no interval set for MAC-notification.

Parameters

secs

Specifies the MAC-notification interval in seconds between each set of traps that are
generated. The range is from 1 through 3600 seconds (1 hour). The default range is 3
seconds.

Modes

Global configuration

Usage Guidelines

Depending on the interval you specify, a trap will be sent aggregating the MAC events such as addition
or deletion.

Examples

The following example configures an interval of 40 seconds.

device(config)# mac-notification interval 40

The following example sets the interval to its default value:

device(config)# no mac-notification interval 3

History

Release version

Command history

08.0.10

This command was introduced.

mac-notification interval

FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide

445

53-1003086-04