beautypg.com

Displaying vlans in alphanumeric order, Displaying system-wide vlan information – Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide User Manual

Page 424

background image

Displaying VLANs in alphanumeric order

By default, VLANs are displayed in alphanumeric order, as shown in the following example.

device# show run

...

vlan 2 by port

...

vlan 10 by port

...

vlan 100 by port

...

Displaying system-wide VLAN information

Use the show vlans command to display VLAN information for all the VLANs configured on the
device.

The following example shows the display for the IP subnet and IPX network VLANs configured in the
examples in

Configuring an IP subnet VLAN with dynamic ports

on page 388 and

Configuring an IPX

network VLAN with dynamic ports

on page 389.

device# show vlans

Total PORT-VLAN entries: 2

Maximum PORT-VLAN entries: 8

legend: [S=Slot]

PORT-VLAN 1, Name DEFAULT-VLAN, Priority level0, Spanning tree Off

Untagged Ports: (S2) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Untagged Ports: (S2) 17 18 19 20 21 22 23 24

Untagged Ports: (S4) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Untagged Ports: (S4) 17 18 19 20 21 22 23 24

Tagged Ports: None

PORT-VLAN 10, Name IP_VLAN, Priority level0, Spanning tree Off

Untagged Ports: (S1) 1 2 3 4 5 6

Tagged Ports: None

IP-subnet VLAN 10.1.1.0 255.255.255.0, Dynamic port enabled

Name: Mktg-LAN

Static ports: None

Exclude ports: None

Dynamic ports: (S1) 1 2 3 4 5 6

PORT-VLAN 20, Name IPX_VLAN, Priority level0, Spanning tree Off

Untagged Ports: (S2) 1 2 3 4 5 6

Tagged Ports: None

IPX-network VLAN 0000ABCD, frame type ethernet_ii, Dynamic port enabled

Name: Eng-LAN

Static ports: None

Exclude ports: None

Dynamic ports: (S2) 1 2 3 4 5 6

In the show vlans output, ports that are tagged but are not dual-mode ports are listed as tagged ports.
In the following example display output, ports 7 and 8 are dual-mode ports in port-based VLAN 4.
Ports 7 and 8 also belong to port-based VLAN 3, but they are tagged ports only in VLAN 3 and are not
configured as dual-mode ports.

device# show vlan 4

Total PORT-VLAN entries: 5

Maximum PORT-VLAN entries: 3210

PORT-VLAN 4, Name [None], Priority level0, Spanning tree Off

Untagged Ports: None

Tagged Ports: 6 9 10 11

Uplink Ports: None

DualMode Ports: 7 8

ESX624FE+2XG Router# show vlan 3

Total PORT-VLAN entries: 5

Maximum PORT-VLAN entries: 3210

PORT-VLAN 3, Name [None], Priority level0, Spanning tree Off

Untagged Ports: None

Tagged Ports: 6 7 8 9 10

Displaying VLANs in alphanumeric order

424

FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide

53-1003086-04