Vlans, Supported vlan features – Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide User Manual
Page 345
VLANs
Configuring IP subnet, IPX network and protocol-based VLANs.................................. 376
IP subnet, IPX network, and protocol-based VLANs within port-based VLANs............ 377
Routing between VLANs using virtual routing interfaces (Layer 3 Switches only)........381
IP subnet address on multiple port-based VLANconfiguration......................................390
Supported VLAN features
Lists VLANs features supported on FastIron devices.
The following table lists the individual Brocade FastIron switches and the virtual LAN (VLAN) features
they support. These features are supported in the Layer 2 and Layer 3 software images, except where
explicitly noted.
Feature
ICX 6430
ICX 6450
FCX
ICX 6610
ICX 6650
FSX 800
FSX 1600
ICX 7750
VLAN
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.10
4096 maximum VLANs
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.10
802.1Q with tagging
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.10
802.1ad (Q-in-Q) tagging
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.10
Dual-mode VLANs
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.10
Port-based VLANs
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.10
Uplink ports within a port-based VLAN
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.10
Protocol VLANs (AppleTalk, IPv4,
dynamic IPv6, and IPX)
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
08.0.01
No
5
Q-in-Q is not supported on SX series 3rd generation linecard modules
FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide
345
53-1003086-04