Agg-a (r1) - configuration, Agg-b (r2) - configuration – Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide User Manual
Page 197

ports ethe 1/1/1 to 1/1/3 ethe 3/1/1 to 3/1/3
primary-port 1/1/1
deploy
!
AGG-A (R1) - Configuration
This section presents the configuration for the AGG-A (R1) cluster device in
on page 196.
lag lag_agg_a_1 static id 103
ports ethe 2/1 to 2/2
primary-port 2/1
deploy
!
lag lag_agg_a_2 dynamic id 104
ports ethe 1/1 to 1/3
primary-port 1/1
deploy
!
lag lag_agg_a_3 dynamic id 105
ports ethe 1/5 to 1/7
primary-port 1/5
deploy
!
vlan 2 name session-vlan by port
tagged ethe 2/1 to 2/2
router-interface ve 2
!
vlan 3 name keep-alive-vlan by port
tagged ethe 1/12
router-interface ve 3
!
vlan 1905 by port
tagged ethe 1/1 to 1/3 ethe 1/5 ethe 1/7 ethe 2/1 to 2/2
!
hostname R1
!
interface ve 2
ip address 10.1.1.1 255.255.255.0
!
interface ve 3
ip address 10.1.2.1 255.255.255.0
!
!
cluster MCT1 1
rbridge-id 1
session-vlan 2
keep-alive-vlan 3
icl BH1 ethernet 2/1
peer 10.1.1.2 rbridge-id 2 icl BH1
deploy
client client-1
rbridge-id 1901
client-interface ethe 1/1
deploy
client client-2
rbridge-id 1902
client-interface ethe 1/5
deploy
!
AGG-B (R2) - Configuration
This section presents the configuration for the AGG-B (R2) cluster device in
on page 196.
lag lag_agg_b_1 static id 103
ports ethe 2/1 to 2/2
primary-port 2/1
deploy
!
lag lag_agg_b_2 dynamic id 105
AGG-A (R1) - Configuration
FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide
197
53-1003086-04