Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide - Manual (Page 450)

show span designated-protect
Displays a list of all ports that are disallowed to go into the designated forwarding state.
Syntax show span designated-protect
Modes Privileged EXEC mode
Global configuration mode
Interface configuration mode
Command Output The show span designated-protect command displays the following information:
Output field Description
Ports Identifies a port
Examples The following example shows the command output, which indicates that the designated forwarding state
is disallowed for interfaces 2/1/7, 2/1/19, and 2/2/3.
Brocade(config)# show span designated-protect
Designated Protection Enabled on:
Ports: (U2/M1) 7 19
Ports: (U2/M2) 3
History
Release version Command history
07.3.00g This command was introduced.
show span designated-protect
450 FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide
53-1003086-04