beautypg.com

Failover – Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide User Manual

Page 440

background image

failover

Enables or disables LAG hardware failover.

Enables LAG hardware failover. The no form of this command disables LAG hardware failover.

Syntax

failover {next | all}

no failover {next | all}

Command Default

LAG hardware failover is not enabled by default.

Modes

Dynamic LAG configuration mode

Usage Guidelines

Use this command to enable or disable LAG hardware failover. Use the all parameter to enable failover
on all ports in LAG. Use the next parameter to enable failover on the next port in LAG.

Examples

The following example enables LAG failover next:

device(config)# lag one dynamic

device(config-lag-one)# failover next

The following example enables LAG failover all:

device(config)# lag one dynamic

device(config-lag-one)# failover all

History

Release version

Command history

08.0.10

This command was introduced.

failover

440

FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide

53-1003086-04