Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide - Manual (Page 228)

CLI display of summary VLAN information for GVRP TABLE 36
Field Description
Number of VLANs in
the GVRP Database The number of VLANs in the GVRP database.
NOTE
This number includes the default VLAN (1), the GVRP base VLAN (4093), and the
single STP VLAN (4094). These VLANs are not advertised by GVRP but are included in
the total count.
Maximum Number of
VLANs that can be
present The maximum number of VLANs that can be configured on the device. This number
includes statically configured VLANs, VLANs learned through GVRP, and VLANs 1,
4093, and 4094.
To change the maximum number of VLANs the device can have, use the system-max
vlan num command. Refer to
Displaying and modifying system parameter default
settings on page 37.
VLAN-ID The VLAN ID.
MODE The type of VLAN, which can be one of the following:
• STATIC - The VLAN is statically configured and cannot be removed by GVRP. This
includes VLANs you have configured as well as the default VLAN (1), base GVRP
VLAN (4093), and Single STP VLAN (4094).
• DYNAMIC - The VLAN was learned through GVRP.
VLAN-INDEX A number used as an index into the internal database.
To display detailed information for a specific VLAN, enter a command such as the following.
device#show gvrp vlan 1001
VLAN-ID: 1001, VLAN-INDEX: 7, STATIC: NO, DEFAULT: NO, BASE-VLAN: NO
Timer to Delete Entry Running: NO
Legend: [S=Slot]
Forbidden Members: None
Fixed Members: None
Normal(Dynamic) Members: (S2) 1
This display shows the following information.
CLI display of summary VLAN information for GVRP TABLE 37
Field Description
VLAN-ID The VLAN ID.
VLAN-INDEX A number used as an index into the internal database.
STATIC Whether the VLAN is a statically configured VLAN.
DEFAULT Whether this is the default VLAN.
BASE-VLAN Whether this is the base VLAN for GVRP.
GVRP
228 FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide
53-1003086-04