Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide User Manual
Page 150
describes the information displayed by the show lag brief command.
The following example displays the full option of the show lag command.
device# show lag
Total number of LAGs: 5
Total number of deployed LAGs: 3
Total number of trunks created:2 (253 available)
LACP System Priority / ID: 1 / 0024.3889.3b00
LACP Long timeout: 120, default: 120
LACP Short timeout: 3, default: 3
=== LAG "test" ID 35 (static Deployed) ===
LAG Configuration:
Ports: e 3/10
Port Count: 1
Primary Port: 3/10
Trunk Type: hash-based
Deployment: HW Trunk ID 1
Port Link State Dupl Speed Trunk Tag Pvid Pri MAC Name
3/10 Down None None None 35 No 1 0 0024.3889.3b09
=== LAG "test2" ID 1 (static Deployed) ===
LAG Configuration:
Ports: e 3/11
Port Count: 1
Primary Port: 3/11
Trunk Type: hash-based
Deployment: HW Trunk ID 2
Port Link State Dupl Speed Trunk Tag Pvid Pri MAC Name
3/11 Down None None None 1 No 1 0 0024.3889.3b0a
=== LAG "test3" (keep-alive Deployed) ===
LAG Configuration:
Ports: e 3/12
Port Count: 1
Primary Port: 3/12
Trunk Type: hash-based
LACP Key: 9860
Deployment:
Port Link State Dupl Speed Trunk Tag Pvid Pri MAC Name
3/12 Down None None None None No 1 0 0024.3889.3b0b
Port [Sys P] [Port P] [ Key ] [Act][Tio][Agg][Syn][Col][Dis][Def][Exp][Ope]
3/12 1 1 9860 Yes S Agg Syn No No Def No Dwn
Partner Info and PDU Statistics
Port Partner Partner LACP LACP
System MAC Key Rx Count Tx Count
3/12 0000.0000.0000 139 0 0
=== LAG "test4" (keep-alive Not Deployed) ===
LAG Configuration:
Ports: e 3/13
Port Count: 1
Primary Port: 3/13
Trunk Type: hash-based
LACP Key: 0
=== LAG "test5" ID 2 (static Not Deployed) ===
LAG Configuration:
Ports: e 3/14
Port Count: 1
Primary Port: none
Trunk Type: hash-based
Syntax: show lag [ lag-name | brief | deployed | dynamic | id | keep-alive | static ]
Using command this without options displays information for all LAGs configured on the device.
The lag-name variable allows you to limit the display to information for a specific LAG.
The id option displays the output for the LAG specified by the ID.
The brief displays a brief output.
The deployed option limits the display to LAGs that are currently deployed.
The dynamic option limits the display to dynamic LAGs.
The keep-alive option limits the display to keep alive LAGs.
Link Aggregation
150
FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide
53-1003086-04