beautypg.com

Displaying gvrp configuration information – Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide User Manual

Page 225

background image

Displaying GVRP configuration information

To display GVRP configuration information, enter a command such as the following.

device#show gvrp

GVRP is enabled on the system

GVRP BASE VLAN ID : 4093

GVRP MAX Leaveall Timer : 300000 ms

GVRP Join Timer : 200 ms

GVRP Leave Timer : 600 ms

GVRP Leave-all Timer : 10000 ms

===========================================================================

Configuration that is being used:

block-learning ethe 1/3

block-applicant ethe 2/7 ethe 2/11

enable ethe 1/1 to 1/7 ethe 2/1 ethe 2/7 ethe 2/11

===========================================================================

Spanning Tree: SINGLE SPANNING TREE

Dropped Packets Count: 0

===========================================================================

Number of VLANs in the GVRP Database: 15

Maximum Number of VLANs that can be present: 4095

===========================================================================

Syntax: show gvrp [ ethernet port]

This display shows the following information.

CLI display of summary GVRP information

TABLE 34

Field

Description

Protocol state

The state of GVRP. The display shows one of the following:

• GVRP is disabled on the system
• GVRP is enabled on the system

GVRP BASE VLAN ID

The ID of the base VLAN used by GVRP.

GVRP MAX Leaveall
Timer

The maximum number of ms to which you can set the Leaveall timer.

NOTE
To change the maximum value, refer to

Increasing the maximum configurable value of

the Leaveall timer

on page 220.

GVRP Join Timer

The value of the Join timer.

NOTE
For descriptions of the Join, Leave, and Leaveall timers or to change the timers, refer
to

Changing the GVRP timers

on page 222.

GVRP Leave Timer

The value of the Leave timer.

GVRP Leave-all Timer

The value of the Leaveall timer.

Configuration that is being
used

The configuration commands used to enable GVRP on individual ports. If GVRP
learning or advertising is disabled on a port, this information also is displayed.

Displaying GVRP configuration information

FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide

225

53-1003086-04