Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide - Manual (Page 32)

Syntax: [no] mac-movement notification threshold-rate move-count sampling-interval interval
The move-count variable indicates the number of times a MAC address can move within the specified
period until an SNMP trap is sent. It has no default value.
The interval variable specifies the sampling period in seconds. It has no defaut value.
Viewing the MAC address movement threshold rate configuration
To display the configuration of the MAC address movement threshold rate, enter the show
notification mac-movement threshold-rate command at the privileged EXEC level. This command
also displays ongoing statistics for the current sampling interval.
device# show notification mac-movement threshold-rate
Threshold-Rate Mac Movement Notification is ENABLED
Configured Threshold-Rate : 5 moves
Configured Sampling-Interval : 30 seconds
Number of entries in the notification table : 100
MAC-Address from-Port to-Port Last Move-Time Vlan-id
-------------- --------- ------- -------------- -------
0000.0000.0022 7/1 7/2
Apr 29 18:29:35 10
0000.0000.0021 7/1 7/2
Apr 29 18:29:35 10
0000.0000.0020 7/1 7/2
Apr 29 18:29:35 10
0000.0000.001f 7/1 7/2 Apr
29 18:29:35 10
0000.0000.0024 7/1 7/2 Apr
29 18:29:35 10
0000.0000.001e 7/1 7/2 Apr
29 18:29:35 10
0000.0000.0023 7/1 7/2 Apr
29 18:29:35 10
0000.0000.001d 7/1 7/2
Apr 29 18:29:35 10
0000.0000.001c 7/1 7/2
Apr 29 18:29:35 10
(output truncated)
Syntax: show notification mac-movement threshold-rate
The following table defines the fields in the output of the show notification mac-movement
threshold-rate command.
Field definitions for the show notification mac-movement threshold-rate command TABLE 2
Field Description
Threshold-Rate Mac Movement
Notification is Specifies whether the MAC movement notification threshold rate is enabled.
Configured Threshold-Rate The rate in MAC address moves per sampling interval after which a
notification is issued. The range is from 1 through 50000.
Configured Sampling-Interval The sampling interval in seconds over which the number of MAC address
moves is measured. The range is from 1 through 86400, which is the number
of seconds in a day.
Number of entries in the
notification table One entry for each time a MAC address notification threshold was reached.
Viewing the MAC address movement threshold rate configuration
32 FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide
53-1003086-04