Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide - Manual (Page 205)

deploy
client S1-SW
rbridge-id 777
client-interface ethe 4/1
deploy
!
SX800B - VRRP-E configuration
This example presents the VRRP-E configuration for the SX800B cluster device in Figure 35 on page
199.
!
router vrrp-extended
!
interface ve 110
port-name S1-SW
ip address 10.110.0.252 255.255.255.0
ip vrrp-extended vrid 110
backup
ip-address 10.110.0.254
short-path-forwarding
enable
!
S1-SW configuration
This example presents the configuration for the S1-SW device in Figure 35 on page 199.
!
lag lag_s1_sw static id 60
ports ethe 1/1/1 to 1/1/2
primary-port 1/1/1
deploy
!
Vlan 110 by port
tagged ethe 1/1/1 to 1/1/2
router-interface ve 110
!
interface ve 110
ip address 10.110.0.1 255.255.255.0
!
Multicast snooping configuration example
The following figure depicts a multicast snooping configuration. Sample configurations follow.
SX800B - VRRP-E configuration
FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide 205
53-1003086-04