Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide - Manual (Page 204)

!
vlan 1000 name ICL-Session-VLAN by port
tagged ethe 5/1 to 5/2
router-interface ve 1000
!
vlan 1001 name MCT-Keep-Alive by port
tagged ethe 5/3
!
interface ve 1000
ip address 10.0.0.254 255.255.255.252
!
cluster FI-MCT 1750
rbridge-id 801
session-vlan 1000
keep-alive-vlan 1001
icl FI_SX-MCT ethernet 5/1
peer 10.0.0.253 rbridge-id 800 icl FI_SX-MCT
deploy
client S1-SW
rbridge-id 777
client-interface ethe 4/1
deploy
!
SX800A - VRRP-E configuration
This example presents the VRRP-E configuration for the SX800A cluster device in Figure 35 on page
199.
!
router vrrp-extended
!
interface ve 110
port-name S1-SW
ip address 10.110.0.253 255.255.255.0
ip vrrp-extended vrid 110
backup
ip-address 10.110.0.254
short-path-forwarding
enable
!
SX800B- MCT configuration
This example presents the MCT configuration for the SX800B cluster device in Figure 35 on page 199.
lag lag_sx800b static id 55
ports ethe 5/1 to 5/2
primary-port 5/1
deploy
!
vlan 110 name VRRP-E by port
tagged ethe 4/1 ethe 5/1 to 5/2
router-interface ve 110
!
vlan 1000 name ICL-Session-VLAN by port
tagged ethe 5/1 to 5/2
router-interface ve 1000
!
vlan 1001 name MCT-Keep-Alive by port
tagged ethe 5/3
!
interface ve 1000
ip address 10.0.0.253 255.255.255.252
!
cluster FI-MCT 1750
rbridge-id 800
session-vlan 1000
keep-alive-vlan 1001
icl FI_SX-MCT ethernet 5/1
peer 10.0.0.254 rbridge-id 801 icl FI_SX-MCT
SX800A - VRRP-E configuration
204 FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide
53-1003086-04