Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide - Manual (Page 202)

tagged ethe 11/25 to 11/36
router-interface ve 6
spanning-tree
!
vlan 1905 by port
tagged ethe 1/1 to 1/2 ethe 15/1 to 15/2
!
hostname R3
hitless-failover enable
!
interface ve 5
ip address 10.2.1.1 255.255.255.0
!
interface ve 6
ip address 10.2.2.1 255.255.255.0
!
cluster MCT2 2
rbridge-id 3
session-vlan 5
keep-alive-vlan 6
icl BH3 ethernet 1/1
peer 10.2.1.2 rbridge-id 4 icl BH3
deploy
client AGG_Cluster
rbridge-id 1801
client-interface ethe 15/1
deploy
DIST-B (R4) - Configuration
This example presents the configuration for the DIST-B (R4) cluster device in Figure 35 on page 199.
lag lag_dist_b_1 static id 40
ports ethe 17/1 to 17/2
primary-port 17/1
deploy
!
lag dist_b_2 dynamic id 41
ports ethe 1/1 to 1/2
primary-port 1/1
deploy
!
lag keep-alive static id 201
ports ethe 5/25 to 5/36
primary-port 5/25
deploy
!
vlan 5 name session-vlan by port
tagged ethe 17/1 to 17/2
router-interface ve 5
!
vlan 6 name keep-alive-vlan by port
tagged ethe 5/25 to 5/36
router-interface ve 6
spanning-tree
!
vlan 1905 by port
tagged ethe 1/1 to 1/2 ethe 17/1 to 17/2
!
hostname R4
hitless-failover enable
!
interface ve 5
ip address 10.2.1.2 255.255.255.0
!
interface ve 6
ip address 10.2.2.2 255.255.255.0
!
cluster MCT2 2
rbridge-id 4
session-vlan 5
keep-alive-vlan 6
icl BH3 ethernet 17/1
peer 10.2.1.1 rbridge-id 3 icl BH3
deploy
DIST-B (R4) - Configuration
202 FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide
53-1003086-04